E3 Aviation Products
Rear Facing Molle Panel FX3/2
$546.69
The Ridged REAR Facing MOLLE Panel FX3/2 is a rugged, purpose-built organizational solution designed specifically for the Carbon Cub FX-3 (and compatible with FX-2 variants) aircraft. This single heavy-duty panel mounts securely in the front-facing interior position, transforming underutilized space into a versatile tactical storage system for backcountry pilots. Reinforced ridged design for added strength and rigidity, it features a full grid of standard MOLLE slots. This allows secure attachment of pouches, holsters, hooks, and accessories using MOLLE-compatible gear.
Key Features:
- Heavy-duty construction — Built to handle substantial loads without flexing or failure
- Includes complete hanging hardware (mounting blocks, screws, and fasteners) for straightforward, no-drill installation
- Optimized fit for the FX3/FX2 cockpit/front area, maximizing accessibility while preserving cabin space and cargo access.
Ideal For:
- Mounting heavy items like firearms (guns), oil bottles, tool kits, flashlights, multi-tools, or emergency gear.
- Organizing essential pilot equipment such as first aid supplies, navigation tools, communication devices, or survival items.
- Quick-access setups for backcountry, adventure, or tactical aviation missions.
Perfect for pilots who demand reliable, vibration-resistant storage in demanding environments — whether hauling gear into remote strips or keeping critical items within arm's reach during flight. Upgrade your Carbon Cub FX-3 today with this robust, pilot-focused MOLLE panel for unmatched organization and readiness.(Note: Always verify compatibility and installation with your aircraft's specific configuration and consult an A&P mechanic if needed for experimental aircraft modifications.)
3-week lead time
ADD TO CART
Front Facing Molle Panel FX3/2
$569.28
The Ridged Front Facing MOLLE Panel FX3/2 is a rugged, purpose-built organizational solution designed specifically for the Carbon Cub FX-3 (and compatible with FX-2 variants) aircraft. This single heavy-duty panel mounts securely in the front-facing interior position, transforming underutilized space into a versatile tactical storage system for backcountry pilots. Reinforced ridged design for added strength and rigidity, it features a full grid of standard MOLLE slots. This allows secure attachment of pouches, holsters, hooks, and accessories using MOLLE-compatible gear.
Key Features:
- Heavy-duty construction — Built to handle substantial loads without flexing or failure
- Includes complete hanging hardware (mounting blocks, screws, and fasteners) for straightforward, no-drill installation
- Optimized fit for the FX3/FX2 cockpit/front area, maximizing accessibility while preserving cabin space and cargo access.
Ideal For:
- Mounting heavy items like firearms (guns), oil bottles, tool kits, flashlights, multi-tools, or emergency gear.
- Organizing essential pilot equipment such as first aid supplies, navigation tools, communication devices, or survival items.
- Quick-access setups for backcountry, adventure, or tactical aviation missions.
Perfect for pilots who demand reliable, vibration-resistant storage in demanding environments — whether hauling gear into remote strips or keeping critical items within arm's reach during flight. Upgrade your Carbon Cub FX-3 today with this robust, pilot-focused MOLLE panel for unmatched organization and readiness.(Note: Always verify compatibility and installation with your aircraft's specific configuration and consult an A&P mechanic if needed for experimental aircraft modifications.)
3-week lead time
ADD TO CART
Back Cargo Molle Panel FX3/2
$304.56
The Centered Back MOLLE Panel with Stabilizer Legs FX3/2 is a rugged, precision-engineered organizational solution custom-designed for the Carbon Cub FX-3 (and compatible with FX-2 variants) aircraft. This heavy-duty, single-sided MOLLE panel features an extended lower profile with integrated stabilizer legs that ensure perfect centering and alignment within the aircraft's interior structure. While the legs provide minor vertical support and primarily serve to hold the panel securely in position without relying on them for primary load-bearing, the main mounting occurs via robust upper attachment points for rock-solid, vibration-resistant installation.Cut from high-strength material with a full grid of standard MOLLE slots across the main body, this panel transforms cockpit or forward interior space into a highly accessible tactical storage area. The distinctive arched/angled top and leg extensions are tailored to the unique contours of the Carbon Cub, allowing it to sit flush and centered while maximizing usable mounting surface without intruding on legroom, controls, or cargo paths.
Key Features:
- Full MOLLE grid — Standard 1-inch spaced slots for secure attachment of pouches, holsters, hooks, straps, and MOLLE-compatible accessories.
- Stabilizer legs — Non-structural extensions that keep the panel perfectly centered and aligned in the aircraft; provide light positional support while primary security comes from upper mounting hardware.
- Heavy-duty construction — Rigid, flex-resistant design built to withstand constant vibration, turbulence, and backcountry abuse without deformation.
- Complete mounting hardware included — All necessary brackets, screws, fasteners, and spacers for a straightforward, no-drill installation that leverages existing aircraft structure.
- Optimized aircraft-specific fit — Shaped to hug the FX3/FX2 interior contours, preserving full cabin functionality, seat movement, and easy access to controls and gear.
Ideal For:
- Quick-access storage of essential items like firearms, oil bottles, flashlights, multi-tools, headsets, or emergency gear right within arm's reach of the pilot.
- Organizing pilot-critical equipment such as first aid supplies, navigation aids, communication devices, spare batteries, or survival tools in a clean, secure setup.
- Backcountry and adventure pilots who want reliable, no-rattle storage that stays put during rough takeoffs, landings, or turbulent flights.
Perfect for those upgrading their Carbon Cub FX-3 to maximize organization in tight spaces — delivering clean, centered mounting without added bulk or complexity. Install it once and enjoy vibration-proof, ready-when-you-need-it gear storage for remote strips, extended trips, or tactical aviation missions.
(Note: Always verify compatibility with your specific aircraft configuration and consult an A&P mechanic if needed for experimental aircraft modifications.)
ADD TO CART
Front Molle Sandwich Pack FX3/2
$998.00
The Dual-Sided MOLLE Panel System FX3/2 is a rugged, all-in-one organizational upgrade engineered for the Carbon Cub FX-3 (and compatible with FX-2 variants) aircraft. This innovative heavy-duty panel combines front-facing and rear-facing MOLLE surfaces into a single, integrated package, delivering double the mounting real estate while incorporating enhanced hardware for superior strength and versatility.
Featuring full grids of standard MOLLE slots on both the forward-facing side (for quick cockpit access) and the aft-facing side (for rear cargo-area organization), this panel supports secure attachment of pouches, holsters, hooks, straps, and a wide array of MOLLE-compatible accessories. The reinforced ridged construction, paired with upgraded mounting hardware, ensures exceptional rigidity and load-bearing capacity even under heavy vibration, turbulence, or rough-field operations.
Key Features:
- Dual-sided design — Front-facing MOLLE for immediate pilot/co-pilot access; rear-facing MOLLE for expanded cargo-area storage and organization.
- Heavy-duty, reinforced construction — Built from high-strength materials to support substantial loads without flexing, cracking, or failure in extreme conditions.
- Enhanced hardware package — Includes all necessary mounting blocks, heavy-duty screws, fasteners, brackets, and spacers for a secure, no-drill installation on both sides.
- Optimized fit for FX3/FX2 interiors
- Mounting heavy or frequently used items like firearms, oil bottles, tool kits, flashlights, multi-tools, fire extinguishers, or emergency beacons on the front side for arm's-reach convenience.
- Organizing bulkier gear such as first aid kits, survival supplies, navigation tools, communication devices, spare parts, or additional pouches on the rear side for efficient cargo management.
- Creating quick-access, vibration-resistant setups for backcountry expeditions, adventure flying, tactical missions, or remote strip operations where every inch of organization counts.
Elevate your Carbon Cub FX-3 today with this dual-sided, hardware-rich MOLLE panel system for unparalleled organization, readiness, and mission capability.
(Note: Always verify compatibility with your specific aircraft configuration and consult an A&P mechanic if needed for experimental aircraft modifications.)
ADD TO CART
Small Hook
$26.00
The Carbon Fiber-Infused PP MOLLE Hook FX3/2 is a compact, ultra-durable 3D-printed utility hook engineered specifically as the perfect companion accessory for your Carbon Cub FX-3 (and FX-2 compatible) MOLLE panels. Crafted from high-performance carbon fiber reinforced polypropylene (PP), this hook delivers exceptional strength, impact resistance, and lightweight toughness in a small-footprint design that stands up to the rigors of backcountry aviation. The hook features a robust curved profile for secure hanging of gear, paired with a square base plate that mounts directly to standard MOLLE slots using the included stainless steel bolts and nuts.
Key Features:
- Premium material — 3D printed in carbon fiber infused polypropylene for superior strength-to-weight ratio, chemical resistance, and durability in extreme temperatures and environments.
- Secure MOLLE mounting — Base plate with pre-drilled holes compatible with standard 1-inch MOLLE webbing; includes two stainless steel bolts and nuts for quick, tool-minimal attachment.
- Compact yet capable hook — Generous curve holds headsets, flashlights, gloves, small bags, keys, or other frequently accessed items without snagging or interfering with cockpit space.
- Lightweight and low-profile — Adds minimal weight and protrusion, preserving cabin ergonomics and easy access to controls.
- Corrosion and UV resistant — Ideal for aviation use where exposure to fuels, oils, sun, and moisture is common.
- Quick-access hanging of pilot essentials like headsets, sunglasses, multi-tools, flashlights, or comms cables right on your front-facing MOLLE panel.
- Organizing small gear such as gloves, checklists, water bottles (with loops), or emergency items in the cockpit without cluttering surfaces.
- Backcountry pilots needing reliable, rattle-free storage solutions that won't fail under vibration or impact during remote strip operations.
(Note: Always verify compatibility with your specific MOLLE panel and aircraft configuration. Consult an A&P mechanic if needed for experimental aircraft modifications.)
1-week lead time
ADD TO CART
Large Hook
$34.00
The Heavy-Duty MOLLE Hook FX3/2 is a robust, high-capacity 3D-printed utility hook designed as a premium accessory for your Carbon Cub FX-3 (and FX-2 compatible) MOLLE panels. Manufactured from tough, carbon fiber-infused polypropylene, this larger hook offers significantly greater load-bearing capability and a more generous curve than standard hooks, making it ideal for securing heavier or bulkier items in the demanding environment of backcountry aviation. The wide, deep J-shaped hook profile securely holds substantial gear without slipping, while the reinforced dual-hole base plate mounts firmly to standard MOLLE slots using the included stainless steel bolts and nuts. Engineered for extreme vibration resistance, impact toughness, and fatigue endurance, the carbon fiber reinforcement delivers exceptional strength-to-weight performance that outperforms ordinary plastic hooks under flight stresses, rough landings, and prolonged use.
Key Features:
- Advanced material — 3D printed in high-strength carbon fiber infused polypropylene for outstanding rigidity, impact resistance, chemical tolerance, and durability across wide temperature ranges.
- Heavy-duty hook design — Larger, deeper curve accommodates bulkier items like headsets with boom mics, larger flashlights, fire extinguishers, tool pouches, water bottles with carry loops, gloves, or bundled survival gear.
- Secure MOLLE attachment — Reinforced base with two pre-drilled holes for standard 1-inch MOLLE webbing; includes stainless steel bolts and nuts for fast, secure, tool-light installation.
- Vibration-proof and low-profile — Stays locked in place during turbulence or hard maneuvers while minimizing cockpit intrusion and maintaining easy access to controls.
- Fuel, oil, and UV resistant — Built to handle exposure to aviation fluids, sunlight, and harsh outdoor conditions without degrading.
- Hanging heavier pilot essentials such as ANR headsets, large tactical flashlights, compact fire extinguishers, or multi-tool kits directly on front-facing MOLLE panels for instant access.
- Securing bulk cargo-area items like spare oil quarts, small gear bags, first aid pouches, or communication devices on rear-facing panels without rattling or shifting.
- Backcountry and adventure pilots who require dependable, high-load hanging points that perform reliably during remote operations, extended flights, or aggressive off-airport landings.
(Note: Always verify compatibility with your specific MOLLE panel and aircraft configuration. Consult an A&P mechanic if needed for experimental aircraft modifications.)
1-week lead time
ADD TO CART
Shorty Basket
$167.90
The Shorty MOLLE Basket FX3/2 is a compact, heavy-duty 3D-printed storage bin engineered as a versatile add-on for your Carbon Cub FX-3 (and FX-2 compatible) MOLLE panels. Designed with a low-profile "shorty" form factor, this rugged open-top basket mounts securely to standard MOLLE slots and provides dedicated, quick-access containment for multiple heavy or bulky items — easily accommodating 3+ quarts of aircraft oil, plus room for additional tools, supplies, or gear.Constructed from tough, carbon fiber-infused polypropylene, the basket features reinforced walls with a full grid of cutouts for weight reduction without sacrificing strength, a solid base for stable support, and integrated mounting points that align perfectly with MOLLE webbing. A separate clip-on or slide-in divider/organizer strip (included) allows you to customize internal organization or add extra security for smaller items. The deep-sided design keeps contents contained during aggressive maneuvers, turbulence, or rough-field operations, while the open-front/top layout ensures fast grab-and-go access in the cockpit.
Key Features:
- Premium construction — 3D printed in high-strength carbon fiber infused polypropylene for exceptional load capacity, impact resistance, vibration tolerance, and durability in aviation environments.
- High-capacity shorty design — Holds 3+ standard oil quarts (or equivalent heavy items like tool kits, fire extinguishers, survival cans, or spare fluids) with extra space for multi-tools, rags, or small pouches.
- Full MOLLE compatibility — Multiple mounting holes/slots on the back for secure attachment to front- or rear-facing panels using standard MOLLE hardware (bolts/nuts not included unless bundled).
- Reinforced and vented structure — Thickened edges and strategic cutouts reduce weight while maintaining rigidity; prevents flexing or cracking under load.
- Includes divider accessory — Removable slotted strip for subdividing the interior or securing loose items.
- Chemical/UV resistant — Withstands exposure to oils, fuels, hydraulic fluids, and sunlight without degrading.
- Storing and transporting essential aircraft maintenance items like multiple oil quarts, solvent cans, or grease tubes right in the cockpit for in-flight or post-landing access.
- Organizing heavier pilot gear such as compact tool rolls, emergency kits, water bottles, or bundled supplies without them shifting or spilling during flight.
- Backcountry pilots needing a secure, no-rattle "catch-all" for bulkier consumables or tools on remote trips, short strips, or extended adventures.
(Note: Always verify compatibility with your specific MOLLE panel and aircraft configuration. Consult an A&P mechanic if needed for experimental aircraft modifications.)
2-week lead time
ADD TO CART
Large Basket
$269.87
The Large MOLLE Basket FX3/2 is a heavy-duty, precision-CNC-machined storage solution crafted specifically as a high-capacity upgrade for your Carbon Cub FX-3 (and FX-2 compatible) MOLLE panels. Manufactured from premium King StarBoard® marine-grade high-density polyethylene (HDPE), this rugged, oversized open-top basket delivers exceptional durability, load-bearing strength, and environmental resistance in a lightweight, aircraft-optimized design. The extended rectangular form features a full grid of large cutouts for significant weight savings while maintaining structural integrity, tall reinforced sidewalls to contain bulkier loads, and integrated mounting points that secure directly to standard MOLLE slots. The solid base and deep-sided construction keep contents secure during high-vibration flights, rough landings, or turbulent conditions, with easy top/side access for quick retrieval in the cockpit or cargo area.
Key Features:
- Premium King StarBoard® material — CNC-machined from the original marine-grade HDPE sheet: environmentally stabilized for UV, humidity, fuels, oils, and extreme temperatures; will not rot, warp, delaminate, swell, or corrode.
- High-capacity large design — Ample interior volume to hold multiple oil quarts (6+), tool kits, fire extinguishers, survival containers, spare parts, or bundled heavy gear with room to spare.
- Full MOLLE compatibility — Precision-cut mounting holes/slots on the back for rock-solid attachment to front- or rear-facing panels (hardware not included unless bundled; compatible with standard MOLLE fasteners).
- Reinforced CNC construction — Thickened edges, strategic cutouts for reduced weight without compromising rigidity; vibration-resistant and impact-tough for demanding backcountry use.
- Includes divider accessory — Removable slotted strip for internal organization or securing loose items.
- Easy maintenance — Matte textured surfaces clean quickly and require no refinishing; ideal for aviation exposure to fluids and elements.
- Bulk storage of aircraft essentials like multiple oil containers, hydraulic fluid bottles, grease tubes, or maintenance supplies accessible during or after flight.
- Organizing heavier pilot/cargo gear such as large tool rolls, emergency kits, water jugs, first aid supplies, or bundled consumables without shifting or spilling in rough conditions.
- Backcountry and expedition pilots needing a secure, no-rattle high-volume "bin" for extended remote operations, multi-day trips, or off-airport adventures.
(Note: Always verify compatibility with your specific MOLLE panel and aircraft configuration. Consult an A&P mechanic if needed for experimental aircraft modifications.)
3-week lead time
ADD TO CART
Molle Plugs
$19.86
The MOLLE Plug Adapter Set FX3/2 is a simple yet powerful 3D-printed customization kit designed to unlock endless creative possibilities on your Carbon Cub FX-3 (and FX-2 compatible) MOLLE panels. These compact square-base plugs install directly into standard MOLLE slots, providing a secure, threaded mounting point (central hole) that lets you attach your own hardware, custom hooks, straps, ties, or improvised accessories — turning your aircraft's MOLLE grid into a truly personalized storage and organization system.Crafted from tough, carbon fiber-infused polypropylene, each plug features a low-profile square base with a precisely drilled center hole for bolting on whatever fits your needs. The included stainless steel bolts and nuts ensure a vibration-resistant, rock-solid connection that holds up to flight stresses, turbulence, and rough backcountry use. With these adapters, you're no longer limited to off-the-shelf MOLLE gear — hang your favorite carabiners, zip-tie tools, custom 3D-printed brackets, bungee cords, Velcro straps, or any creative solution you devise.
Key Features:
- High-strength material — 3D printed in carbon fiber infused polypropylene for excellent rigidity, impact resistance, and durability in aviation conditions.
- Universal MOLLE fit — Square base slides into standard 1-inch MOLLE slots; central hole accepts bolts for secure custom attachments (compatible with M4/M5 or similar hardware).
- Complete hardware included — Each set comes with stainless steel bolts and nuts for quick, tool-minimal installation; corrosion-resistant for exposure to fuels, oils, and moisture.
- Low-profile and lightweight — Minimal added bulk or weight while enabling maximum customization without interfering with cockpit ergonomics.
- Versatile and creative — Enables DIY hanging points for headsets, gloves, checklists, small bags, lights, or unique setups tailored to your flying style.
- Pilots who want to mount non-standard or personally sourced gear like custom tool holders, additional hooks, lanyards, or quick-release systems.
- Creative organization of small-to-medium items such as spare keys, sunglasses cases, comms cables, or emergency items using everyday hardware.
- Backcountry and adventure flyers experimenting with setups for remote strips — adapt on the fly for changing mission needs without buying specialized accessories.
(Note: Always verify compatibility with your specific MOLLE panel and aircraft configuration. Consult an A&P mechanic if needed for experimental aircraft modifications.)
2-week lead time
ADD TO CART